GRP WATER STORAGE TECHNOLOGY

PFG PRODUCTS

One-Piece GRP Tanks

One-Piece GRP Tanks

Durable, moulded tanks up to 25, 000 litres for long-term water storage

PFG One-Piece tanks are manufactured by hand laminating GRP composite on purpose-made tooling at PFG’s facilities in the Midlands.

Only resins specifically formulated for drinking water are used for the laminate. The laminating process is partially automated by the use of roller dispensers and consistent reinforcement schedules.

The laminate may incorporate sandwich cores and structural ribs depending upon the tank size. Also depending upon specification, factory fitted thermal insulation can be incorporated, protected by a further laminate layer. Insulation is normally 25mm thick to provide a U value of 0.84 W/m2K. 50mm or 75mm thick are also available as options.

One-Piece tanks are available with covers, supplied loose or sealed and can be fitted with access hatches and raised inlet valve chambers for type AB airgaps.

A common application of one-piece tanks is the storage of drinking water. This is the W16-4 tank that comes factory pre-insulated with 25mm thick polyurethane foam, an insulated sealed cover, an access hatch (1000 litre size upwards), Combiscreen overflow and warning pipe, EPDM vent pipe, grommet seal and screened air vent.

For situations where a standard tank cannot be accommodated, non-standard sizes can be fabricated to order. These are generally offered up to about 6000 litres and a height of 1500mm, although through the use of a fully moving crane, PFG can manufacturer up to 25, 000 litres.

Standard product dimensions – Click Here

One-Piece tanks can also be specified as horizontally split. This configuration allows ease of handling at restrictive sites without the cost premium associated with a sectional tank.

Features & Benefits
  • Range includes 18L - 25,000L
  • Over 100 standard product sizes
  • Bespoke dimensions available
  • Short lead times for delivery
  • Designed to BS EN 13280:2001
  • WRAS approved product range
Case Study

18,000L one-piece GRP tank, supplied and installed at a fruit juice manufacturing site in Cardiff. [more]

Enquiries
Page Top | Home | Site Map | Privacy Policy

Parton Fibreglass Ltd
PFG House
Claymore
Tame Valley Industrial Estate
Tamworth, Staffordshire,
B77 5DQ
United Kingdom

Telephone:
Fax:
E-Mail (UK):
E-Mail (non UK):

+44 (0)1827 251899
+44 (0)1827 261390
sales@pfg-tanks.com
export@pfg-tanks.com

UKASSafeContractor ApprovedConstructionLineComposites UKWRAS Approved Product
PFG